THE NRF24L01 IS A SINGLE CHIP 2.4GHZ TRANSCEIVER WITH AN EMBEDDED BASEBAND PROTOCOL ENGINE (ENHANCED SHOCKBURST), DESIGNED FOR ULTRA LOW POWER WIRELESS APPLICATIONS. THE NRF24L01 IS DESIGNED FOR OPERATION IN THE WORLD WIDE ISM FREQUENCY BAND AT 2.400 – 2.4835GHZ. AN MCU (MICROCONTROLLER) AND VERY FEW EXTERNAL PASSIVE COMPONENTS ARE NEEDED TO DESIGN A RADIO SYSTEM WITH THE NRF24L01.THE NRF24L01 IS CONFIGURED AND OPERATED THROUGH A SERIAL PERIPHERAL INTERFACE (SPI.) THROUGH THIS INTERFACE THE REGISTER MAP IS AVAILABLE. THE REGISTER MAP CONTAINS ALL CONFIGURATION REGISTERS IN THE NRF24L01 AND IS ACCESSIBLE IN ALL OPERATION MODES OF THE CHIP.
n
FEATURES:
n
nMAXIMUM OPERATING SPEEDS UP TO 2MBPS, GFSK MODULATION EFFICIENCY, ANTI-INTERFERENCE ABILITY, PARTICULARLY SUITABLE FOR INDUSTRIAL CONTROL APPLICATIONS.
n125 CHANNELS, MULTI-POINT COMMUNICATION AND FREQUENCY HOPPING TO MEET THE COMMUNICATION NEEDS
nBUILT-IN HARDWARE CRC ERROR DETECTION, MULTIPOINT COMMUNICATION ADDRESS CONTROL.
nLOW-POWER 1.9 ~ 3.6V, ONLY 1UA ON POWER DOWN MODE
nBUILT-IN 2.4GHZ ANTENNA
nAVAILABLE SOFTWARE TO SET THE ADDRESS, ONLY RECEIVED LOCAL ADDRESS WHEN OUTPUT DATA(PROVIDE INTERRUPT INSTRUCTION), CAN BE DIRECTLY CONNECTED TO A VARIETY OF MICROCONTROLLERS, SOFTWARE PROGRAMMING IS VERY CONVENIENT.
nBUILT-IN VOLTAGE REGULATOR
nSTANDARD DIP PITCH INTERFACE FOR EMBEDDED APPLICATIONS
nSIZE: 34MM X 17MM X 1MM
n
SPECIFICATION:
nPOWER SUPPLY :1.9V~3.6V
n
nWORKING CURRENT:13.5MA AT 2MBPS / 11.3MA AT 0DBM OUTPUT POWER
n
nIO COUNTS :8
n
nSENSITIVITY :-85DBM AT 1MBPS
n
nEMISSION DISTANCE :70~100 METER AT 256KBPS
n
nDATA RATE :256KBPS / 1MBPS / 2MBPS
n
nCOMMUINITCATION MODE :ENHANCED SHOCKBURST TM / SHOCKBURST TM
n
nWORKING MODE :POWER DOWN MODE / STANDBY MODE / RX MODE / TX MODE
n
nTEMPERATURES :OPERATING:-40°C ~ 85°C / STORAGE:-40°C ~ 125°C
Protected by Patchstack