DIMENSIONS OF THE BOARD: APPROX 35MM X 31MM.
nSTEPPER MOTOR DRIVER BOARD WITH ULN2003 CHIP.
nFOUR-PHASE LED INDICATES THE STATUS OF THE STEPPER MOTOR WORK.
nSTEPPER MOTOR WITH A STANDARD INTERFACE, WHEN USED DIRECTLY PLUGGABLE.
n
n
STEPPER MOTOR:
n
n- COLOR: SILVER
n- DIAMETER: 28MM
n- VOLTAGE: 5V
n- NO-LOAD PULL INTO THE FREQUENCY: >600HZ
n- PHASE: 4
n- NO-LOAD PULL-OUT FREQUENCY: >1000HZ
n- REDUCTION RATIO: 1/64
n- PULL-IN TORQUE: >34.3MN.M (120HZ)
n- STEP ANGLE: 5.625 X 1/64
n- SELF-POSITIONING TORQUE: >34.3MN.M
n- DCR: 200OHM +/- 7% (25’C)
n- TEMPERATURE: <40K (120HZ)
n- INSULATION RESISTANCE: >10MOHM (500V)
n- NOISE: <40DB (120HZ, NO LOAD, 10CM)
n- DIELECTRIC STRENGTH: AC 600V / 1MA / 1S
n- INSULATION CLASS: A
n- CABLE LENGTH: 24CM
n- SUITABLE FOR GUIDE WIND DEFLECTOR, PORTABLE AIR CONDITIONER VALVE, ETC
n- DIMENSIONS: 1.65 IN X 1.22 IN X 0.79 IN (4.2 CM X 3.1 CM X 2.0 CM)
n- WEIGHT: 1.20 OZ (34 G)
n
n5 LINE 4 PHASE CAN BE DRIVEN BY ORDINARY ULN2003 CHIP, CAN ALSO BE CONNECTED IN PHASE 2 DEVELOPMENT BOARD USED FOR.
nSUPPORTING THE USE OF A DIRECT PLUG AND EASY TO USE STEPPER MOTOR USED IN THE DEVELOPMENT BOARD.
n
nSTEPPER MOTOR WIRING:
n
n1. 4-WAY INPUT OF I1, I2, I3, I4 CORRESPONDING CONNECT TO THE 4 IO LINES OF MCU.
n2. MOTOR STEPPER DIRECTLY PLUG MOTOR INTERFACE, PAY ATTENTION TO THE SOCKET GROOVE JOINTS CORRESPONDING CONVEX SIDE.
n
Package Contents:
n
Protected by Patchstack