Internal 1000 Ohm half-bridge strain gauge load cell, range is 50kg, half-bridge structure.
nWhen measuring, the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the middle, with a beam of white plastic cover arm) and the outside edges to form a shear force in the opposite direction, i.e., in the middle of strain beam bending necessary changes can occur under stress, strain beam side by another force can not have a barrier.
n
nTHE SENSOR USE THE FOLLOWING THREE METHODS:
n
n1, USING A SENSOR WITH EXTERNAL RESISTORS FULL BRIDGE MEASUREMENT RANGE OF A SENSOR RANGE: 50KG. HIGHER REQUIREMENTS FOR EXTERNAL RESISTOR
n2, THE USE OF ONLY TWO FULL-BRIDGE SENSORS MEASURING RANGE IS THE RANGE OF THE TWO SENSORS AND: 50KGX2 = 100KG
n3, THE USE OF FOUR FULL-BRIDGE SENSORS MEASURING RANGE IS THE RANGE OF FOUR SENSORS AND: 50KGX4 = 200KG
n
n
n n n
| Product Name | Weighing Load Cell |
| Rated Load | 50kg |
| Ranted Output | 1.0 +/-10 %mV/V |
| Non-Linearity | 0.08%F.S. |
| Hysteresis | 0.1%F.S. |
| Repeatability | 0.05%F.S. |
| Zero Balance | +/-1%F.S. |
| Temp Effect on Zero | 0.05%F.S./10C |
| Temp Effect on Zero Output | 0.02%F.S./10C |
| Creep (30min) | 0.05%F.S. |
| Input Impedance | 1000+/-20 Ohm |
| Output Impedance | 1000+/-20 Ohm |
| Insulation | > 3000 Megohm / 50V DC |
| Compensated Temperature Range | -10C~450C |
| Operating Temperature Range | -20C~65C |
| Safe Overload | 120%F.S. |
| Ultimate Overload | 150%F.S. |
| Recommended Excitation | 5V |
| Load Cell Size | 34 x 34mm/1.3″ x 1.3″ |
| Cable Length | 41cm / 16″ |
| Main Color | Silver Tone |
| Material | Aluminum Alloy |
| Weight | 79g |
| Package Content | 1 x Weighing Load Cell |
n
Protected by Patchstack